Modern Rustic Farmhouse In the end, this wonderful piece of furniture, which was built utilizing planks made of whitewood, was put up for sale and ultimately purchased by the person who has it now.
It is designed in a contemporary style overall, and it features a total of four spacious drawers that can be used as storage space.
Simply go to the website Ana-White.com and click on the link labeled “Plans” to receive free, in-depth directions on how to construct your very own rustic modern farmhouse dresser.
Clicking on this link will lead you to a page where the Farmhouse instructions can be downloaded.
This lovely dresser with four drawers has a look that is a combination of the Farmhouse rustic modern and farmhouse styles of furniture design.
The frame of the dresser is constructed with recycled wood. Because it is at table height, this dresser is ideally suited for use as a console or in combination with a television when both items are used together.
You are free to put it to use in any part of your house, be it the living room, the Farmhouse hallways, or a different room altogether.
The making of this piece is remarkably similar to the Farmhouse process of building the nightstands in practically every conceivable respect.
It would be to your advantage to spend some time watching the movie that can be found at this link to obtain a better understanding of the procedure that was followed to develop the nightstand.
You can find the movie here. On our website, you’ll be able to find the video Carry out this step as you continue to move forward with the Farmhouse procedure.
Using the saw, you can remove the top boards from the table and remove the table altogether. After a stop block has been positioned at the beginning of the process, it is strongly advised that a miter saw be used to cut the components, as this will ensure a clean cut every time.
As a result of this, you may rest easy in the knowledge that the duration of each of the components will be precisely equivalent to that of the Farmhouse others.
Except for one of the top pieces, you should proceed to drill pocket holes into each of the Farmhouse’s remaining top pieces using a drill bit with a diameter of three-quarters of an inch.
You should use pocket hole screws that are 1.25 inches in length to fasten each connection that you make as you progress through the Farmhouse process of merging the pieces.
You must collect dimensions before cutting the 1×2 lumber to guarantee that it will fit along the front and rear sides of the Farmhouse structure.
This may be done by measuring both the front and back of the building. Put everything together by gluing it and then nailing it together with brad nails that are exactly 1 and 1/4 inches long.
Learn more: Woodworking Project